RCO催化燃烧技术

催化燃烧基本原理：

有机废气催化净化装置是我公司积累了多年的研究，实践经验，在取得出色成果的基础上，不断完善而形成的系列有机废气催化净化装置。
应用范围
1、可用于有机溶剂的净化处理（苯类、醇类、酮类、酯类、酚类、醚类、烷类等混合有机废气）。
2、适用于电线、电缆、漆包线、机械、电机、化工、仪表、汽车、自行车、摩托车、发动机、磁带、塑料、家用电器等行业的有机废气净化。
3、可用于各种中高浓度挥发性有机气体、烘道、印铁制罐、表面喷漆、印刷油墨、电机绝缘处理、皮鞋粘胶等烘干流水线，净化各工序产生的有机废气。
本装置的特点：
1、用优质金属钯、铂镀在蜂窝陶瓷载体上作催化剂、净利效率高达95—100%，寿命长，且可再生，气体流畅，阻力小。
2、安全设施完备：有阻火除尘器、泄压孔、超温报警等保护设施。
3、耗用功率：预热15～35分钟全功率加热，工作时只消耗风机功率即可。废气浓度较低时，自动间歇补偿加热。
4、余热回收利用：余热可以返回烘道用来烘干工作，降低原烘道中消耗功率；也可供工厂其它方面热能回用（作为浴室、散热器等热源）。
5、可以选择电加热和天然气加热等多种加热方式。
6、本装置可用于吸附饱和的活性炭脱附再生。
选型公式：
1.确保有机废气不外逸的最小风量VA
VA=K·3600·f·V0(m3/h)
V0=气体不外逸的最小吸入速度0.5～0.7m/s
f——设备的敞口面积之和（m2）
k——安全系数1.05～1.10
确保溶剂的挥发浓度小于1/4混合气体爆炸下限时安全浓度VB
每班有机溶剂消耗量（g）
VB= 混合气体的安全浓度（g/m3）×每班实际工作时间（h）
综合：VA、VB计算结果来确定设备的型号，这样更可靠、更安全。

Basic principle of catalytic combustion:

Organic exhaust gas catalytic purification plant is I the company has accumulated many years of research and practical experience, on the basis of outstanding achievements, and constantly improve and form a series of organic exhaust gas catalytic purification plant.

Range of application

1, can be used for the purification of organic solvent, benzene, alcohols, esters, ketones, phenols, ethers, alkanes and mixed organic waste gas).

2, suitable for wire, cable and enameled wire, mechanical, electrical, chemical, instrument, automobile, bicycle, motorcycle, engine, tape, plastic, household appliances and other industries of organic waste gas purification.

3, can be used in a variety of high concentration of volatile organic gas, baked road, printing cans, surface paint, printing ink, electrical insulation treatment, leather shoes drying lines, such as glue to purification of organic waste gas in each process.

The characteristics of this device:

1, with high quality metal palladium and platinum plating on ceramic honeycomb carrier for catalyst, net profit efficiency is as high as 95-100%, long life, and renewable, gas flow, small resistance.

2, the safety facilities: there are fire dust catcher, pressure relief hole protection, overtemperature alarm, etc.

3, power consumption: preheating 15 ~ 35 minutes full power heating, fan power consumption only when you work. Exhaust gas concentration is low, automatic intermittent heating compensation.

4, waste heat recycling, waste heat can return bake, used to dry work, reduce the original path of consumed power; Also available for heat recycling factory other ways (as a bathroom, radiators and other heat source).

5, can choose the electric heating and gas heating heating a variety of ways.

6, this device can be used in the saturated adsorption of activated carbon regeneration.

The selection formula:

1. Ensure that the minimum air volume of organic waste gas to escape but VA

VA = K · 3600 · f · where V0 (m3 / h)

Where V0 = the minimum suction gas to escape but speed is 0.5 ~ 0.7 m/s

F - equipment exposure area is the sum of (m2)

K - safety coefficient is 1.05 ~ 1.10

To ensure that the evaporation of the solvent concentration is less than a quarter of the mixed gas explosion lower limit safe concentration of VB

Organic solvent consumption per class (g)

VB = the safety of the gas mixture concentration (g/m3) actual working hours (h) x per shift

Synthesis: VA, VB calculation results to determine the type of device, more reliable and safer.