光氧催化工业废气处理设备

产品原理

     光氧催化废气净化器利用特制的高能UV紫外线光束照射恶臭气体如；氨、三甲胺、硫化氢、甲硫氢、甲硫醇、甲硫醚、二甲二硫、二硫化碳和苯乙烯，VOC类，苯、甲苯、二甲苯的分子链结构的裂解、断链、氧化、分解，使其分子链，在高能紫外线光束照射下，裂解转变成低分子化合物，如CO2、H2O等。

     利用高臭氧UV紫外线光束分解空气中的氧分子产生游离氧，即活性氧，因游离氧所携正负电子不平衡需与氧分子结合，进而产生臭氧。UV＋O2→O-+O＊(活性氧)O+O2→O3(臭氧)，众所周知臭氧对有机物具有极强的氧化作用，对恶臭气体及其它刺激性异味气体有立竿见影的清除效果。

    恶臭气体经过排风设备输入到光氧废气净化器后，净化设备运用高能UV紫外线光束、高浓臭氧强氧化对恶臭气体进行协同分解氧化反应，使恶臭气体物质降解转化成低分子化合物、水和二氧化碳，再通过排风管道排入大气。

    利用高能UV光束裂解恶臭气体中细菌的分子键，破坏细菌的核酸（DNA），再通过臭氧进行氧化反应，彻底达到脱臭及杀灭细菌的目的。

    光氧催化废气净化器运行过程安全。

技术特点

    高效除恶臭

    能高效去除挥发性有机物（VOC）、无机物、硫化氢、氨气、硫醇、苯类等主要污染物，以及各种恶臭味，脱臭效率最高可达90%以上，脱臭效果大大超过国家1993年颁布的恶臭污染物排放标准（GB14554-93）．

    无添加

    只需要设置相应的排风管道和排风动力，使恶臭气体通过本设备进行脱臭分解净化，无需添加任何物质参与化学反应。

    适应性强

    可适应高浓度，大气量，不同恶臭气体物质的脱臭净化处理，可每天24小时连续工作，运行稳定可靠。

    运行成本低

    本设备无任何机械动作，无噪音，无需专人管理和日常维护，只需作定期检查，本设备能耗低，设备风阻极低＜300pa,可节约大量排风动力能耗。

    无需预处理

     恶臭气体无需进行特殊的预处理，如加温、加湿等,设备工作环境温度在摄氏-30℃－95℃之间，湿度在30%－98%、PH值在2-13之间均可正常工作。

    占地小

    设备占地面积小。

    材料优质

    箱体采用不锈钢制造，具有防火、防腐蚀的特点，性能稳定，使用寿命长。

    专利产品

    使用本产品可彻底分解恶臭气体中有毒有害物质，并能达到完美的脱臭效果，经分解后的恶臭气体，可完全达到无害化排放，绝不产生二次污染，同时达到高效消毒杀菌的作用。

Product principle
The photo-oxygen catalytic exhaust gas purifier irradiates the malodorous gas, such as, for example; The molecular chain structures of ammonia, trimethylamine, hydrogen sulfide, methylmercaptan, methylthioether, dimethyl disulfide, carbon disulfide and styrene, VOC, benzene, toluene and xylene are cracked, broken, oxidized and decomposed, so that the molecular chain is cracked and converted into low molecular compounds such as CO2, H2O and the like under the irradiation of high-energy ultraviolet light beams.
The high ozone UV light beam is used to decompose the oxygen molecules in the air to generate free oxygen, i.e. reactive oxygen, which needs to be combined with oxygen molecules due to the imbalance of positive and negative electrons carried by the free oxygen, thus generating ozone. Uv + O2 → o - + o * ( active oxygen ) o + O2 → O3 ( ozone ), it is well known that ozone has a strong oxidation effect on organic matter, and has an immediate effect on the removal of malodorous gases and other irritating odor gases.
After the malodorous gas is input to the photo-oxygen exhaust gas purifier through an exhaust device, the purification device carries out cooperative decomposition and oxidation reaction on the malodorous gas by using a high-energy UV light beam and high-concentration ozone strong oxidation, so that the malodorous gas substances are degraded and converted into low-molecular compounds, water and carbon dioxide, and then the malodorous gas substances are discharged into the atmosphere through an exhaust pipeline.
The molecular bonds of bacteria in the malodorous gas are cracked by using high-energy UV light beams, the nucleic acid ( DNA ) of the bacteria is destroyed, and then the oxidation reaction is carried out by ozone, so that the purposes of deodorization and sterilization of the bacteria are thoroughly achieved.
The operation process of the photocatalytic waste gas purifier is safe.
Technical characteristics
Efficient deodorization
Can effectively remove volatile organic compounds ( VOC ), inorganic substances, hydrogen sulfide, ammonia, mercaptan, benzene and other major pollutants, as well as a variety of malodor, deodorization efficiency can reach more than 90 %, deodorization effect is much more than the national 1993 issued by the malodor pollutant emission standards ( gb14554 - 93 ).
No added
Only the corresponding exhaust pipeline and exhaust power need to be set, so that the malodorous gas can be deodorized, decomposed and purified through the equipment, and no substances need to be added to participate in chemical reaction.
Strong adaptability
Can adapt to the deodorization and purification treatment of high concentration, air volume and different malodorous gas substances, can work continuously 24 hours a day, and is stable and reliable in operation.
Low operation cost
The equipment has no mechanical action, no noise, no need of personnel management and daily maintenance, only needs to be checked regularly, the energy consumption of the equipment is low, the wind resistance of the equipment is extremely low < 300pa, and a large amount of exhaust power energy consumption can be saved.
No preprocessing is required
The malodorous gas does not need special pretreatment, such as heating, humidification and the like, the working environment temperature of the equipment is between - 30 deg c and 95 deg c, the humidity is between 30 and 98 percent, and the ph value is between 2 and 13.
Small footprint
The equipment covers a small area.
Material quality
The box body is made of stainless steel and has the characteristics of fire prevention and corrosion prevention, stable performance and long service life.
Patented product
By using the product, toxic and harmful substances in the malodorous gas can be thoroughly decomposed, the perfect deodorization effect can be achieved, the decomposed malodorous gas can completely achieve harmless discharge, no secondary pollution can be generated, and meanwhile, the effect of high-efficiency disinfection and sterilization can be achieved.
Shandong Shuangcheng environmental protection technology co., ltd. is a well-known manufacturer of photocatalytic industrial waste gas treatment equipment in Shandong specializing in the production of photocatalytic industrial waste gas treatment equipment, Shuangcheng photocatalytic industrial waste gas treatment equipment with sincere reputation, with preferential price of photocatalytic industrial waste gas treatment equipment, enthusiastic service, return to customers. Our main products are: waste gas treatment, waste gas treatment equipment, waste gas purification equipment, etc., the products are sold throughout the country, well received by users. Find out the latest price of photooxidation catalytic industrial waste gas treatment equipment available on our website